Temphawk Specifications
Hardware Specifications
| Dimensions (in mm): | 68 x 86 x 36 |
| Weight: | 300g |
| IP Code: | IP67 |
| Sensors: | Temperature and Humidity (external) |
| Temperature sensor working range: | -40ºC to +125ºC |
| Temperature sensor resolution: | 0.015ºC |
| Temperature sensor accuracy: | +/- 0.2ºC |
| Humidity sensor range(%RH): | 0/100% |
| Humidity sensor resolution: | 0.01%RH |
| Humidity sensor accuracy: | +/- 3%RH |
| Battery: | Lithium Battery |
| I/O Interface | 2 Red LED Lights Micro USB Type-B (waterproof) for power |
| Protocol: | Sigfox |
| Radio Configuration Zones: | 1 2 4 |
| Transmission interval: | Every 10 minutes |
| Certifications: | Sigfox Ready, Class 0 (Highest class) RoHS FCC CE Low Voltage Directive (LVD) |
Sigfox Ready
The Sigfox Ready certification measures the radio performance of the device. Temphawk is Sigfox Ready with the highest Class rating, making it good for indoor and outdoor use.
If you have purchased a Temphawk device and need its product certificate you can refer to the table below.
| Regions | RC | End Product Certificate | Sigfox Partner Network |
| Europe, South Africa | 1 | P_00BE_B271_01 | Link |
| Canada, USA, Mexico, Brazil | 2 | P_00BE_77FF_01 | Link |
| Latin America (CR, ES, HN, PA, CO, AR) APAC (TW, SG, AU, NZ, HK) |
4 | P_00BE_B9B5_01 | Link |
Certified Sensor Probe
Temphawk sensor has been tested and certified by SGS for accuracy and resolution. It is one of the few sensors which can accurately measure up to two decimal places.
The sensor’s material is also FDA approved, making it good to be in direct contact with food.
